Warmline EPS (Expanded Polystyrene) Bonded Plasterboard 2400 x 1200mm Various Thicknesses

Warmline EPS Polystyrene Bonded Plasterboard 2400 x 1200mm The Warmline EPS insulating laminates are designed as a simple effective way to improve the thermal efficiency in both walls and roof applications. Sheets are made up of Expanded Polystyrene & Plasterboards. They are fully applicable with Part L of the building regulations. Expanded Poly Bonded to Plasterboard Benefits All thicknesses readily available Simple solution to upgrading walls and roofs Quick and easy to install Can be used for both newbuild and refurb A simple way to meet building regulations Cost effective return Fixing Instructions for Dot & Dab For bonding Warmline range to a wall use a proprietary gypsum based adhesive. Please follow the manufacturers instructions. As per manufacturers recommendations apply a continuous ribbon of adhesive around any openings. Apply 3 vertical rows of adhesive dabs to the walls at 300mm centres. Also insure that there is a continuous bead at the bottom and top. After the adhesive has set fix a minimum of 2 insulation anchors through the board into the wall. They must go into the masonry by a minimum of 30mm. Fixing instructions for mechanical fixing Fix to the wall treated batons 50mm x 25mm at a maximum of 600mm centres. Also fit horizontal batons at both floor and ceiling level. Then fit the Warmline board using drywall screws at 150mm centres. Always insure that they penetrate the batons by 25mm. When installing boards to rafters fix them at right angles to the timbers. To ensure a solid finish bridging pieces are to used inbetween the rafters. Delivery available to selected postcodes.