Lo-Chlor Swimming Pool Chemicals Starver X Phosphate Remover - 1 Litre

Starver® X is a safe and effective superior strength phosphate remover for swimming pools, fountains and ponds. Starver® X is a curative solution designed to remove high phosphate levels. One litre will remove up to 6000 ppb (6ppm) of phosphates from a 50,000 litre swimming pool.   Before ….   After Treatment   GENERAL INSTRUCTIONS If algae is present, it is recommended you treat this algae first with one of the Lo-Chlor Algaecides prior to beginning phosphate removal. Clean or backwash filter and ensure pool water is balanced. Shake the container well before use. Slowly add the required amount of Starver® X to the pool water directly in front of the skimmer box inlet. It is recommended that immediately following the addition of Starver® X, place one Lo-Chlor Miraclear Pool Clarifier Cube directly into the pump basket (follow package directions). The addition of a Miraclear Pool Clarifier Cube will reduce any cloudiness associated with phosphate removal. Run filtration system continuously for 24 hours. Check filter pressure regularly and backwash, if necessary. Test phosphate level of pool water at least 24 hours after treatment. If necessary, repeat additional dosages at weekly intervals until phosphate level is within acceptable range. For faster results, Starver® X dosage can be repeated at 24-hour intervals. N.B. After treatment regularly check phosphate levels in your pool. For ongoing control and treatment of phosphates use Lo-Chlor Starver®. REMEMBER NO PHOSPHATE = NO ALGAE.   Scan here for more information!