Crack Stitching Helicoidal Bar 8mm x 3m

Our 1 metre Crack Stitching Helicoidal Bar is a helical stainless steel reinforcement rod.  It can be used in accordance with BS 5628 (part 2). They are primarily used for reinforcing bed joints to enhance lateral loading resistance in new and existing buildings. 3 metre Helicoidal Bars can also be used to repair many structural defects in existing masonry by using repair strategies like over-pinning with ring beams, general crack stitching repairs, lintel failures and re-tying (disconnected and unconnected) solid or cavity masonry panels. They can also be used to remedy a lot of structural defects in existing masonry. This is done by using repair strategies like general crack stitching repairs, overpinning with ring beams,  lintel failures and re-tying (disconneced and unconnected) solid or cavity masonry panels. Benefits Quick installation Low labour costs Tensile strength more than double required by BS5628 Minor visual and structural disturbance Lengths up to 8 meters Good bonding to resins and grouts Easily installed in bed-joints Enhances lateral loading resistance Features Austenitic 304 stainless steel Easy and problem free installation Effective in cavity and solid walls Our 3 metre Crack Stitching Helicoidal Bar is a helical stainless steel reinforcement rod.  It can be used in accordance with BS 5628 (part 2). Bar Diameter Bars per Joint Tension Load 6mm Single Bar 8.39kN 8mm Single Bar 11.06kN Mechanical Properties Of Bars Diameter CSA (mm2) 0.2% Proof Stress (N/mm2) Ult Tensile Strength (N/mm2)* Mean Tensile Capacity# 5mm 6.0 >770 1050 – 1190 6.75 kN 6mm 7.8 >715 1050 – 1190 8.77 kN 7mm 9.7 >750 1050 – 1190 10.91 kN 8mm 12.9 >715 1050 – 1190 14.44 kN 9mm 15.6 >775 1050 – 1190 17.47 kN