SWITCH IP-COM G1105PD UNMANAGED 4 PUERTOS GIGABIT ETHERNET POE + 1 PUERTO POE ENTRADA

SWITCH IP-COM G1105PD UNMANAGED 4 PUERTOS GIGABIT ETHERNET POE + 1 PUERTO POE ENTRADA - 5-Port Gigabit PD Switch With 4-Port PoE - Five 10/100/1000 Mbps auto-negotiation ports - Port 5 supports power supply by a PSE compliant with IEEE 802.3af/at - Ports 1 - 4 support power supply to low-power PDs compliant with IEEE 802.3af - The switch supports auto MDI/MDIX, simplifing the network structure and maintenance - The non-blocking wire-speed forwarding function guarantees the smooth operation of network applications - Full-duplex flow control and half-duplex back pressure control prevent frame loss caused by port blocking - The switch supports the store-and-forward transfer mode and a 2 K MAC address table - The switch supports 9K jumbo frame, improving the forwarding rate of large files - The switch supports IP camera connection and guarantees the smoothness and clearness of monitoring videos - Overview: Featuring low cost, high performance and plug & play, the PoE switch G1105PD is both a PSE and a PD, designed for such surveillance networking scenarios as roads in parks/communities, medium to large factories, and colleges. Small and delicate, it can be installed in an outdoor waterproof box easily. The switch provides four 10/100/1000 Mbps PoE OUT ports (ports 1 to 4) compliant with IEEE 802.3af and one 10/100/1000 Mbps PoE IN port (port 5) compliant with IEEE 802.3af/at. The maximum PoE output power of the whole switch is 22 W. The switch can supply power and transmit data to low-power APs and IP cameras through CAT5 cables, greatly reducing the cost of the network deployment. It is an ideal choice for wired networking in monitoring scenarios of middle to long distance. - Gbps data transmission: The transmission rate of 5 Gigabit ports can reach up to 2000 Mbps in full-duplex mode. Full wire-speed forwarding functionality on all ports guarantees the smooth transmission of the surveillance videos monitored by HD IP cameras. - Integrated PSE&PD: The switch can be powered by a IEEE 802.3af/at compliant PSE through port 5 with an Ethernet cable, and supply power to such PDs as low-power APs and IP cameras through ports 1 to 4. - 6 kV lightning protection: This switch provides short circuit protection for PSE and 6 kV lightning protection for all ports, protecting the switch itself to operate steadily from surge and lightning damages in thunderstorms. - PoE Relay for long-distance network As a relay, the switch can extend the data transmission distance to 325 meters at most and offer long-distance PoE power supply through multiple PoE ports. - Plug and play With the plug and play functionality, the switch can be used directly after it is connected to a PSE with an Ethernet cable, reducing breakdowns as well as operation and maintenance cost. * ESPECIFICACIONES: - Product Model: G1105PD - Network standards IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at - Transmission media: 10Base-T: CAT3 UTP or better 100Base-TX: CAT5 UTP or better 1000Base-T: CAT5e UTP or better - Dimensions: 100 mm x 100 mm x 26 mm(L x W x H) - Product material: Metal - Fan: Fanless - LED indicators: 1 x Power LED indicator 4 x PoE LED indicator 5 x Link/Act LED indicator - Fixed ports: 5 x 10/100/1000 Mbps auto-negotiation RJ45 ports (supporting Auto MDI/MDIX) - PoE out: PoE standard:IEEE 802.3af PoE power cable core:8 cores: voltage of cores 1, 2, 4, 5 is +, and cores 3, 6, 7, 8 is - PoE port:1 - 4 Maximum output power of a single port:15.4 W Maximum output power of the switch:22 W - PoE in: PoE in standard:IEEE802.3af, IEEE802.3at PoE in port:5 PoE input:50 - 57V DC, 0.6A - Protection: Port lightning protection: 6 kV Power lightning protection: No Electrostatic protection: - Air discharge: ±8 kV - Contact discharge: ±6 kV - Forwarding mode: Store-and-forward - Switching capacity: 10 Gbps - Packet forwarding rate: 10 Mbps: 14880 pps 100 Mbps: 148800 pps 1000 Mbps: 1488000 pps - Buffer: 1 Mb - MAC address table: 2 K - Jumbo frame: 9 K - Installation method: Desktop mounting: Support Wall mounting: Not support Rack mounting: Not support - Environment: Operating temperature: 0°C - 45°C Storage temperature: -40°C - 70°C Operating humidity: (10% - 90%), non-condensing Storage humidity: (5% - 90%), non-condensing - Certificates: CQC, FCC, CE, RoHS - Protocol: CDMA/CD - MAC address learning: Auto-learning, auto-updating - Function: No